foil for digital printer( toner reactive foil)

  • Digital Hot Stamping Gold Foil
  • Digital Hot Stamping Gold Foil
  • Digital Hot Stamping Gold Foil
Digital Hot Stamping Gold FoilDigital Hot Stamping Gold FoilDigital Hot Stamping Gold Foil

Digital Hot Stamping Gold Foil

  • colors can OEM
  • thickness is 16U
  • 10 rolls per cartons
  • Product description: Digital Hot Stamping Gold Foil, When the foils are exposed to moderate heat and high pressures InFocus toner foil for digital printers

Foil is a new product especially designed for the short run digital print markets and works with any Pneumatic laminator fitted with a rewind bar (and some non-pneumatics).

The foiling process is created by simply applying a toner based ink to a sheet of paper, only the area of toner will be applied with the foil, the area around the toner is not adhesive to the foil product and therefore remains clean. This very simple application enables intricate patterns to be created in colour foils, holographic effects or certain areas of importance to be picked out and gloss or matt laminated, the latter is known as spot lamination and has traditionally been the strength of much larger wet laminating machines.

The sleeking foils also create a re-printable surface enabling you to print over the coloured foil in a 2nd pass, this enables you to create metallic effect inks in every colour that your press can produce.

Our range of foiling, spot laminating and holographic films are available in a variety of colours and finish types, each are on 320mm width and 640MM rolls and 300 Metres in length (Other widths and lengths are available - please ask) The following effects are available:( for more than 100 colors can choose)

1)  Holographic Silver

2)  Holographic Gold

3)  Laser Silver

4)  Laser Gold

5)  Laser Silver

6)  Laser Silver

7)  Red

8)  Green

9)  Purple

10)  Light Pink

11)  Light Blue

12)  Light Grey

13)  Light Purple

14)  Iron Grey

15) Rose

16)  Royal Blue

17) Light Blue

18)  Copper

19) Glass Green

20) Coffee

21) Copper

22) Blue

23) Light Blue

24) Deep Blue

25) Copper

26)  Blue Purple

27)  Copper

28) rainbow


This product is NOT suitable for inkjet printers and Brother Laser Printers due to the toner they use (it will not re-fuse). A suitable Toner Image Applicator (TIA) is also required to apply the required heat and pressure for toner transfer.

An iron can also be used however the results can be mixed.

Toner printer uses gold foil paper

Toner printer uses gold foil paper

Toner printer uses gold foil paper

Step 1: The computer selects the image to be printed

Step 2: Print the pattern

Step 3: Cut the hot stamping paper
Step 4: Photo press is overheated

Step 5: After the paper is cold, tear it open

:::::::: ♥♥ STEP BY STEP ♥♥::::::::
Printing you artwork in black & white use you laser printer.
Monochrome printer works best, colour laser printer works as well if you print your artwork in b/w.

Laminator power on or iron heat up.
gold foil shinny side up, grey side face to face with you printed artwork, then go through your laminator or press with your heated iron.
you may need kitchen / baking paper to sandwich your artwork and your foil.

when your sandwich comes out, remove your baking paper, tear off your foil, all your black toner places are replaced with your shinny foil.

Done, your masterpiece standing there with shinny faces smiling to you.

I tried many printers, they all work. But depends on the type of your toner powder, I cannot guarantee working every printer.
for coated paper, special paper, textured paper, cannot get best result.

This foil do not need industrial or productive laminator.
the laminator on above pictures without adjustable button except power on/off. but it works.

Solid black works best, if your prints are grayscale or other colours, will get poor result.
Smooth paper works best. rough paper poor quality.

:::::::: ♥♥ CHECK MY VIDEO ♥♥::::::::

Q & A
QUESTION: How you foil works with other laminator ?

ANSWER: I tried many. but for sure I cannot try everyone. it will works because most of them working temperatures are roughly 160-170 celsius.
this foil works that temperature. it changes the specifications to fit the household laminators.

I am a graphic designer running a small printing business. the first foil order took me two months to get the best result. I tried every temperature, pressure & speed.
Later, I works with the manufacture, changed a bit to fit household/ office laminator

Anything I can help, just send me a message, my pleasure to answer.

Q1) .How about your MOQ of your foil ?
If you have shipping agent ,no MOQ
If not have ,will have 10 Rolls per color ,MOQ 100ROlls
Q2). Could you please give me the quality sample?
If you need some sample for reference,please let us know your fully address/ship
mode with courier,and we will arrange our available sample for your reference.
Q3).  What is your lead time ?
7-15 days , depending on the quantity  , we almost have safe stock .
Q5). How do I pay for my order?
We accept L/C ,T/T , Paypal .

Phone: +0086-137 1295 8399 (Nomant)
Address: Dongguan,Guangdong,China