Paper screen printing bronzing process
Some time ago, customer feedback said that the hot stamping
could not be completed, and the hot stamping
paper was too tight.
I received the customer's paper today. After analysis, it was found that most of it was caused by the customer's too little glue. hot stamping
, resulting in hot stamping is fancy
In the morning, after the master's printing, because it is paper, the screen printing plate is stuck. After printing, the effect is very hot.
The operation process is as follows: screen printing bronzing paste 2-3 times
After the bronzing paste is completely dry, press it at 140 ° C for 15 seconds. After the paper is cold, slowly tear it off.